Industrial lubricants & Fluids

Material Safety Data Sheets can be found for each product at the bottom of this page

FormLUBE 10 ...  is a Concrete form release oil formulated as a Low viscosity, non-regulated mould release fluid
which has proven effective in separating concrete from steel and plastic moulds and dies.

FormLUBE 10 is a blend of approx 75% Bio-degradable components and a mineral oil and does NOT contain any “traditional” solvents as used in many other similar type products that often have a low Flash point, FormLUBE 10 has a flash point greater than 160 degC and therefore is NOT classed as Dangerous goods

Features;
     • Non-regulated for storage and transport.
     • Provides good penetration into moulds.
     • Easy to apply via brushing, swabbing or conventional spray systems.
     • User friendly when compared to other similar type products.
     • More environmentally friendly.
     • Non staining to finished product.
     • Excellent release properties.
     • Minimum “build up”.
     • Contains rust and corrosion inhibitors

SolCUT 975 ... is a synthetic based Chlorine, Cobalt and Nitrite free multipurpose biodegradable extreme pressure emulsified cutting oil which forms a stable milky emulsion when added to water.

SolCUT 975 contains a highly sophisticated system of extreme pressure additives, non silicone anti-foam, anti-rust and anti-bacterial agents and is suitable for use with all machining applications and materials as a coolant/lubricant.

BioFORM ... Bio-degradable Mould Release oils ... are a Vegetable based 100% Bio-degradable concrete form release oils manufactured with Bio-degradable base stocks with anti-rust and anti-oxidation additives and available in various viscosities.

BioFORM 10, BioFORM 20, BioFORM 30 and BioFORM 40 are cost effective replacements for Solvent based mould releases, BioFORM offers excellent performance whilst being user and enviromentally friendly.

The BioFORM formulation is the result of significant Government assisted research and developement and is exclusive to Synforce.

available in 20 litre, 205 litre and 1000 litre

CompSYN ... is a full synthetic Ashless, non detergent Compressor Oil fluid uniquely formulated from PAO/Ester base fluids for use in a wide range of applications including oil flooded rotary vane and rotary screw compressors, screw type compressors and reciprocating air compressors, pumps,  refrigeration and vacuum pumps operating under both normal & severe conditions.

CompSYN is recommended as a direct replacement for PAG compressor oils such as Sullair Sullube® and Ingersoll-Rand® fluids and offers;

*        Excellent Resistance to Thermal Degradation – Carbon, varnish and lacquer deposits due to high temperature operation are virtually eliminated.  

*        Superior Oxidative Stability – Any oil, as it is increasingly exposed to high temperature operation, undergoes the process of oxidation. This results in the oil’s thickening and build-up of acidic components. Because of the PAO’s uniform molecular structure, the process of oxidation is greatly reduced.

*        Extended Drain Intervals – Because of the PAO’s excellent resistance to thermal degradation and oxidation, the oil’s service life is extended up to eight (8) times the normal service life of conventional compressor oils.

*        Low Volatility – The low volatility of the PAO’s results in lower makeup requirements due to evaporation loss.

*        Less Oil carry over – Due to its low volatility, there are fewer problems with the oil getting into air tools, instruments or even the production process. It also means there is less oil to remove in the air/oil separators and fewer air filter changes.

*        High Viscosity Index – This results in a minimum change in viscosity with temperature. The adequate viscosity for proper bearing lubrication is provided regardless of temperature change.

*        Excellent Cold Temperature Starting and Pumpability.

*        Fire and Explosion Possibilities are Greatly Reduced – This is due to not only the PAO’s extremely low carbon forming tendencies, but also to their relatively high flash, fire and auto ignition points.

*        Greater Hydrolytic Stability and Demulsibility Characteristics – Since PAO’s are non-polar; they absorb less water under high humidity conditions. They also separate condensed water much faster and more completely, thus resulting in the water being removed easily from the system. These properties result in extended bearing life, anti-wear protection and improved rust and corrosion protection.

*        Excellent Operating Temperature Reduction – PAO’s have better specific heat valves (less available heat is absorbed) and better thermal conductivity that conventional air compressor oils. These combined properties help to reduce operating temperatures.

*        Compatibility with all Types of Seals and Coatings

CompSYN meets or exceeds;       DIN 51506 (VBL, VCL, VDL)         ISO / DP 6521 (DAA, DAB, DAH, DAG)

CompSYN is available in ISO 32, 46, 68 and 100 or blended to specific requirements

GearPLUS SAE 90 & SAE 140  ... are superior new generation XRM^R (Extra Range Multigear) gear oils with special limited slip differential performance and tackifiers to enhance performance. They are specifically designed to provide very much improved;

• Ultra Thermal Stability - XHT^R (Extra High Temperature)
• Oil Seal Life
• Durability (Gear Surface Life)
• Corrosion Protection to Yellow Metals under both Wet and Dry conditions
• Limited slip differential performance

All these properties help overcome the growing concerns of the gear manufacturers (OEMs - Original Equipment Manufacturers), vehicle and fleet owners relative to these performance areas when operating with the former generation of conventional hypoid extreme pressure (EP) drive train and limited slip lubricants.

Gearplus SAE 90 & SAE 140 can be specified irrespective of service severity, for OEM initial fill and service fill of conventional and limited slip car, truck and tractor differentials and other final drives, transfer and steering gearboxes and manual transmissions. Special oxidation resistant paraffinic base oils combined with high performance XHT^R thermal stable extreme pressure and limited slip additives are formulated into Gearplus SAE 90 & SAE 140 to ensure long service life to transmission drive lines. They meet the performance requirements of API service GL5, US Military specifications MIL-L-2105D and MIL-PRF-2105E and will far surpass the API service classification MT-1.

GEAR TRAIN RATTLE & NOISES ELIMINATED. The STAY ON properties effectively quieten transmission drive line noise tendencies under all conditions of low speed high torque, high speed low torque and shock loading.

Recommendations

Gearplus SAE 90 & SAE 140 are recommended for initial and service fill and top-up of car, truck and tractor manual transmissions, differentials, including limited slip, final drives and transfer and steering gearboxes. They surpass international OEM gear manufacturers' specific requirements, eg. Mack GO-J, GO-H, Eaton, Fuller, Rockwell, Daimler-Benz, Ford, Volvo, Clark, GM etc.

GearSYN Industrial Gear oils... are a range of severe duty full synthetic Industrial Gear oils blended from PAO base stocks and advanced additive technologies to be suitable for use in almost all conditions.

GearSYN 100, 150, 220, 320, 460 offer advanced protection against the extremes of very high load and very low and high operating temperatures under harsh conditions as well as offering excellent demulsification properties.

Features;
     • Extended drain interval     • Excellent high temperature, high load performance     • Extremely shear stable
     • Compatible with normal mineral EP oils and seals     • Reduced operating temperatures.

Benefits;
     • Longer component life through reduced gear wear
     • Extended lubricant service life.
     • Increased life of seals and gears

Synforce GearLUBE oils ...  are high quality Multi-use lubricants suitable for a wide range of industrial gearing. Using the latest sulfur/ phosphorus EP additive they give minimum gear wear whilst maintaining maximum load carrying capacity. They offer excellent corrosion protection and resistance to high temperature sludging.

GearLUBE Oils are highly recommended for use in all types of enclosed industrial gear boxes and suitable as bearing oils for highly loaded plain bearings. Their compatibility with copper and its alloys make it suitable for gearboxes and drives using bronze components.

Available in ISO grades, 100, 150, 220, 320 and 460

GearLUBE oils meet or exceed ; Cincinnati Milacron ... ANSI/AGMA 9005-D94 (EP) ... AGMA 250.04 (EP), 251.02 (EP) ... US Steel 224, API GL-3

GearLUBE XP Series Gear Oils ... are a range of extra high performance gear oils having outstanding extreme pressure characteristics and load-carrying properties and are suitable for use in all types of enclosed industrial gear drives.

GearLUBE XP series gear oils are formulated on Group 2 base stock technology to meet very high stress by providing extra protection for gears, bearings and seals.

GearLUBE XP series gear oils are formulated to protect gear teeth from Microscopic wear, known as micro-pitting.

GearLUBE XP series gear oils exceeds the industry requirement for bearing wear protection and provide maximum wear and corrosion protection

GearLUBE XP series gear oils are recommended for industrial spur, helical and bevel enclosed gears with circulation or splash lubrication, operating at temperatures up to 100ºC.        They are particularly suitable for gear sets working under heavy or shock loads and may also be used in non-gear applications include highly loaded and slow speed plain and rolling contact bearings.

GearLUBE XP is available in ISO grades, 100, 150, 220, 320, 460 and 680

GearLUBE XP220 meets or exceeds; U.S. Steel 224 ... AGMA 9005-E02 ... DIN 51517 part 3: 2004-01 ... David Brown S1.53.101 ... Cincinnati EP gear oils ... ISO 12925-1 CKC/ D ... Mueller Weingarten DT 55 005

Chain & Bar Oils ... Mineral oil based Heavy Duty oils in ISO 100, ISO 125, ISO 150 and ISO 200 with extreme pressure additives and blended to resist 'fling off' using heavy tackifiers.

These products have been formulated with substantial "overdosed" proportions of anti-wear and extreme pressure additives to give the following benefits;

• Significantly reduced component wear
• Application or flow rates can be reduced without compromise
• Enhanced surface adhesion results in minimum loss

BioBAR Chain & Bar oil ... Bio-degradable Chain & Bar oil

BioBAR is a unique blend of vegetable base oils and additive technology that results in a bio-degradable chain & bar oil that outperforms both traditional bio and mineral bar oils.

The exclusive formulation of Synforce BioBAR contains anti-wear and tackiness additives that are also Bio-degradable making BioBAR truly 100% bio-degradable

Due to the advanced formulation and the very high Viscosity index of the vegetable base oil used, the viscosity range offers advantages over most other products by providing earlier protection at cold start and resisting the effects of heat on viscosity (thinning) at operating temperatures.

Available in … 1, 5, 20, 205 and 1000 litre

R & O Oil ... Rust and Oxidation inhibitor oil, available in ISO grades 32, 46 and 68

Wire Rope Lube 220 ... is blended with selected base oils, extreme pressure and anti wear additives resulting in a high performance wire roap lubricant that easily penetrates and protects against wear and corrosion 

Air Tool Oil MD ... has been specifically developed for use in medium duty pneumatic equipment. Air Tool 68 has excellent anti wear characteristics and gives excellent control over water washing, corrosion and fog formation.

Benefits ; Superior protection against wear ... Effective lubrication in the presence of water ... Excellent resistance to oxidation and gumming ... Low and High temperature lubrication

Rock Drill Oils ... are designed to meet the stringent demands of heavier percussion tools, available in ISO 320 or manufactured to specification

Benefits ; Superior protection against wear & Effective lubrication in the presence of water ... Excellent resistance to oxidation and gumming ... Low and High temperature lubrication

Slideway 68 ... for use in all slide and way applications, available in ISO 68 or manufactured to specification.